How to Repair Cracks In the Wall

On the walls, sometimes, cracks in the paint are generated. Small structural movements, humidity or other conditions can cause the wall to have these damages that also leave a damaged wall. There are different ways to repair cracks, the first one is to use stainless steel corner guards and second repairing method involves little effort and little budget. We encourage you to renovate your cracked walls so that your house looks like new and also prevent the open crack from generating mold or larger cracks.

1. PROTECT THE FLOOR BEFORE PAINTING:

In the first place, whenever we do work with paint, we must protect the soil and the area where we will work. Protect yourself from possible stains and reduce the time to clean and above all, you will avoid disappointment. To protect the floor, use a protective plastic and glue it with masking tape to baseboards and corners. The painting is treacherous and gets everywhere!

2. OPEN THE CRACK SLIGHTLY WITH A SPATULA:

And you will ask: why open the crack more? Will not the wall be broken? The answer is yes and no. The explanation is that to penetrate well the putty that we will apply to cover the crack, there must be a certain gap. This is achieved by opening the crack a bit with the spatula, which does not mean that we break the paint or anything.

3. MAKE THE MIXTURE TO GENERATE THE CRACKED FILLER: THE ESSENTIAL INGREDIENT FOR HOW TO REPAIR CRACKS IN THE WALL

Notice for millennials! Although it sounds obvious, to prepare the lid cracks you must follow the manufacturer’s instructions. Sometimes, it is convenient to read the instructions. Mix the dust off the lid cracks with water in the indicated proportions and you will have the putty that we will apply right away.

4. MOISTEN THE CRACK IN THE WALL WITH WATER BEFORE APPLYING THE PUTTY:

In order to soften the material and that is not brittle when applying the putty, moisten the area with a pallet. A few strokes of the platina wet in a little water should suffice.

5. APPLY THE CRACK FILLER IN THE CRACKS OF THE WALL:

With the spatula, take a glob of putty and apply it on the crack. Make this operation with love and smooth the paste with the flat part of the spatula. Repeat throughout the crack so that the putty is uniform and does not reopen easily. Once you apply the putty well through all the cracks, let the product dry. When the putty dries – this time will depend on each manufacturer and the humidity of the environment.

6. PAINT THE WALL WITH SUITABLE PAINT FOR A PERFECT FINISH:

When it comes to painting, we suggest some tricks to improve the result of the task. First, remove the paint before impregnating it with the roller to avoid lumps. Next, pour some paint in the bucket. To paint the wall, we will use an anti-drip roller that will greatly facilitate the task of painting. Impregnates the roller and wrings the excess paint in the rough part of the tray.

It was time to paint! At this point, we suggest that the roller is well impregnated with the paint but without excess, so that it does not drip and create damage to the wall. An anti-drip roller like the one we have used will make the activity much easier. Go change, right? It takes a lot of focus to see the trace of what the cracks were. As you have seen, repairing cracks in the wall is very simple. Follow the steps well and there will be no crack that you resist.